Dynamic EFI

Bringing TBI and Multi Port Fuel Injection to a New Level.



4-Injector Upgrade

Price: $75 US (order it from the EBL Flash page)...  

Want to run dual 2-bbl TBI's? Or a 4-bbl TBI unit, this is the answer.

With this upgrade your EBL Flash TBI ECM can properly drive 4 low impedance TBI injectors or 8 peak and hold (PnH) port injectors.

Note that this is only an upgrade to the EBL Flash ECM hardware. With the EBL Flash system tuning it is straight forward.


Home | EBL FlashEBL P4 Flash | EBL SFI-6 Flash | Buick Ignition Interface | USB2Serial Adapter | TT-1 WB | Connectors & Terminals
What's Up Display | EBL Wiring | P4 What's Up Display | SFI-6 What's Up Display | EBL P4/SFI-6 Install Guide
 EBL P4 Wiring  | EBL SFI-6 Wiring | Injector Driving | TBI Fueling | Acronyms and Abbreviations | Re-Pinning | Setting Up & Using ADC Channels | Spark Plugs
Introduction to Tuning, Part 1 | Introduction to Tuning, Part 2
EBL Updates | Purchase | Contact Us

     
Copyright 2006-2016 Dynamic EFI, All Rights Reserved.
No part of this document may reproduced in any form or posted on a web site without expressed documented permission from Dynamic EFI