Dynamic EFI

Bringing TBI and Multi Port Fuel Injection to a New Level.

Port Mod for MPFI

Price: $25 US (includes installation, select cylinder count: 6 or 8 when ordering)...  

For those that want to use an EBL Flash ECM with their high performance multi-port fuel injection can now have the injectors firing in batch mode. The Port Mod changes the injector firing to once per engine revolution and is available for either a 6 or 8 cylinder engine (4 cylinder engines do not require the Port Mod).

The installation of this modification needs to be done here at Dynamic EFI. It is a small 1" x 1" PCB that is installed into the ECM.

Port Mod PCB

The Port Mod option is only available in conjunction with the EBL Flash system.

Home | EBL FlashEBL P4 Flash | EBL SFI-6 Flash | Buick Ignition Interface | USB2Serial Adapter | TT-1 WB | Connectors & Terminals
What's Up Display | EBL Wiring | P4 What's Up Display | SFI-6 What's Up Display | EBL P4/SFI-6 Install Guide
 EBL P4 Wiring  | EBL SFI-6 Wiring | Injector Driving | TBI Fueling | Acronyms and Abbreviations | Re-Pinning | Setting Up & Using ADC Channels | Spark Plugs
Introduction to Tuning, Part 1 | Introduction to Tuning, Part 2
EBL Updates | Purchase | Contact Us

Copyright 2006-2018 Dynamic EFI, All Rights Reserved.
No part of this document may reproduced in any form or posted on a web site without expressed documented permission from Dynamic EFI