Dynamic EFI

Bringing TBI and Multi Port Fuel Injection to a New Level.

EBL SFI-6 Wiring Diagrams

Note: these drawings are Copyright Dynamic EFI and are not to be posted on any other web site. They are for use by users of the Embedded Lockers SFI-6 Flash system.

SFI-6 Wiring page 1

SFI-6 Wiring page 2

SFI-6 Wiring page 3

SFI-6 Wiring page 4

SFI-6 Wiring page 5

SFI-6 Wiring page 6

SFI-6 Wiring page 7

SFI-6 Wiring page 8

SFI-6 Wiring page 9

Home | EBL FlashEBL P4 Flash | EBL SFI-6 Flash | Buick Ignition Interface | USB2Serial Adapter | TT-1 WB | Connectors & Terminals
What's Up Display | EBL Wiring | P4 What's Up Display | SFI-6 What's Up Display | EBL P4/SFI-6 Install Guide
 EBL P4 Wiring  | EBL SFI-6 Wiring | Injector Driving | TBI Fueling | Acronyms and Abbreviations | Re-Pinning | Setting Up & Using ADC Channels | Spark Plugs
Introduction to Tuning, Part 1 | Introduction to Tuning, Part 2
EBL Updates | Purchase | Contact Us

Copyright 2006-2018 Dynamic EFI, All Rights Reserved.
No part of this document may reproduced in any form or posted on a web site without expressed documented permission from Dynamic EFI