To receive version 1.26 email us at 'update @ dynamicefi.com'
List of EBL Classic BIN firmware changes:
02/24/07 1.26 Current Version
Added open loop decel mode. To compliment the open loop
cruise & idle
Removed transient open loop mode
02/10/07 1.25
Flipped test for N2Ooff check, to in fuel kill first, then
if engine running
11/25/06 1.24
Added a PromId refresh
Corrected idle B9 in boost, needed to be in drive
10/05/06 1.23
Added a high idle parameter with B9 in grounded, if TCC
set, then needs to be in park/neut
09/23/06 1.22
Added DFCO TPS exit SA reduction
Added EGR code
Added CCP code
Switched usage of L000D b7 & b5 (PE &
q-async request)
Added BPC vs Boost lookup & table
06/12/06 1.21
Added a status bit for A/C output
Changed 'Check coast release tps threshold' so that a coast
'stay locked' works with 0 TPS% settings
Added an async MAP/RPM trip point function for better DC%
Added a fan option to run in PE mode
01/19/06 1.17 is the first released version
Copyright 2006-2023 Dynamic
EFI, All Rights Reserved. No part
of this document may
reproduced in any form or posted on a web site without
expressed documented permission from Dynamic EFI